Titon
Primary question · Is Titon a credible MVHR pick at the value end of the market?
British ventilation manufacturer with a long history in trickle vents and MVHR. The HRV Q Plus range is the unit specifiers reach for when the budget is tight and the project still needs proper heat-recovery ventilation.
Titon is the credible value-tier MVHR pick that specifiers reach for when the fabric budget has already eaten the ventilation allowance. The HRV Q Plus is genuinely competent; British-built, sensibly-sized for a UK loft, and honestly priced against Vent-Axia's mid-range. Where Titon is not competitive is at the top of the specific-fan-power table, and the commissioning process is unforgiving of an installer learning on the job. Pick Titon when the installer has fitted them before and the project is a straightforward retrofit; the saving over Vent-Axia funds better ductwork, which matters more to the outcome than the last percentage point of heat recovery.
- The project is a value-tier retrofit and the ductwork budget is protected by choosing this unit
- The installer has commissioned Titon units before and knows the balancing routine
- You value British manufacture and a UK-based spares pathway
- The building fabric is Passivhaus-grade; Titon is not the ceiling of what the envelope can support
- The installer's MVHR portfolio is mostly Vent-Axia and adding a new brand risks a rougher commissioning
The honest value tier for a proper MVHR unit; typically several hundred pounds below Vent-Axia's Sentinel Kinetic Advance.
Smaller than Vent-Axia's; solid UK coverage among independent ventilation specialists, thinner outside that.
A brand profile is only useful if it survives the questions an informed buyer would put to the installer. These are ours.
- 01
Is the quoted unit current-generation HRV Q Plus, or an older HRV model being cleared?
- 02
What specific fan power is designed on this ductwork layout, and does the installer measure it at commissioning?
- 03
How many Titon jobs has the installer completed, and what does their commissioning sheet look like?
- 04
What is the ten-year filter cost at manufacturer-recommended intervals?
Why we have reached this conclusion
Why the value saving lands in better ductwork, not worse ventilation
MVHR performance is decided more by ductwork geometry than by unit specification, and the honest way to save money on a project is to buy a competent unit and spend the difference on better ducts. Titon lets that trade happen without cutting the wrong corners.
Specific Titon products, with a verdict.
This is our editorial profile of Titon; not a spec sheet, and not a sponsored write-up.
Read the verdict, then look at the specific units we have a view on further down the page.
- Air quality; ventilation first
MVHR, PIV, and the extract fans that quietly matter.
- Compare brands side by side
The comparison surface (Thread 5) sits above every brand page.
Titon: the value saving lands in better ductwork, not worse ventilation.